Equinox AWD V6-3.4L VIN F (2006)
15. Install the tie rod end to the steering knuckle.
16. Using the J 44015 , pull the stud into steering knuckle.
^
Tighten the J 44015 to 40 Nm (30 ft. lbs.).
17. Remove the J 44015 from the tie rod end stud.
18. Install a new nut to the tie rod end stud.
^
Tighten the nut to 50 Nm (37 ft. lbs.).
19. Tighten the wheel drive shaft spindle nut.
^
Tighten the nut to 205 Nm (151 ft. lbs.).