Equinox AWD V6-3.4L VIN F (2006)
1. Align the notch in the window weatherstrip seal to the fixed window post and press the weatherstrip onto the window flange.
1. Press the weatherstrip run channel onto the door flange.
2. Ensure the channel is fully secured into the upper corners of the door frame.
2. Install the inner belt seal. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (See: Sealing Strip Replacement - Rear Door
Window Belt Inner) .
3. Install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair) .