Equinox FWD V6-3.4L (2007)
1. Apply sealant GM P/N 12345493 (Canadian P/N 10953488) or equivalent to the end of the thermal bypass pipe where the pipe is pressed into the
intake manifold.
2. Install the thermal bypass pipe using J 21882 .
Notice: Refer to Fastener Notice .
3. Install the thermal bypass pipe bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Install the thermal bypass hose.
5. Install the upper intake manifold.
6. Fill the engine with coolant.
