Equinox FWD V6-3.4L (2007)
1. Apply GM T-IV automatic transaxle fluid GM P/N 88900925 to the new input speed sensor O-ring.
2. Install the new input speed sensor O-ring onto the input speed sensor.
3. Install the input speed sensor to the transaxle.
Notice: Refer to Fastener Notice.
4. Install the input speed sensor bolt.
Tighten the bolt to 6 N.m (53 lb in).
5. Connect the wiring harness (4) to the input speed sensor.
6. Install the battery tray.