Equinox FWD V6-3.4L VIN F (2005)
License Plate Bracket: Service and Repair
License Plate Pocket Replacement
Removal Procedure
1. Remove the rear license plate screws.
2. Remove the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Interior Trim Panel/Service and Repair) .
3. Remove the nuts that secure the license pocket to the liftgate.
4. Remove the rear license plate pocket from the liftgate.
Installation Procedure
