Equinox FWD V6-3.4L VIN F (2005)
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the left belt idler pulley and bolt to the generator bracket.
^
Tighten the bolt to 50 Nm (37 ft. lbs.).
2. Insure the drive belt is properly centered on all the pulleys except the right idler pulley (3).
3. Using J 39914 rotate the drive belt tensioner away from the drive belt.
4. Install the drive belt to the right idler pulley (2).
5. Carefully release J 39914 allowing the drive belt tensioner (8) to come in contact with the drive belt.
6. Remove J 39914 from the drive belt tensioner (8).
7. Inspect the drive belt to insure the belt is properly centered on all the pulleys (1-8).
8. Install the air cleaner intake duct.