Equinox FWD V6-3.4L VIN F (2005)
7. Disconnect the thermal expansion valve (TXV) temperature sensor from the engine harness.
8. Remove the temperature sensor screw from the evaporator pipe.
9. Remove the temperature sensor from the evaporator pipe.
10. Remove the HVAC module front of dash seal.
11. Remove the evaporator pipe cover screw from the blower case assembly.
12. Remove the evaporator pipe cover from the blower case assembly.
13. Remove the evaporator core from the blower case assembly. Spraying the perimeter of the evaporator core seal with a soap and water mixture will
ease removal.
