chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Steering - Scraping Noise From Behind Steering Wheel|Page 7942 > < Steering - Scraping Noise From Behind Steering Wheel
Page 2
background image

5.

Orient the yellow wires as if they have never been taped together. Yellow wires should be separate, starting from the SIR coil connector. Refer to
the illustration.

6.

Reconnect both yellow wires to the inflatable restraint steering wheel module. For Saturn VUE only, do not connect the horn switch connector at
this time.

7.

Rotate the inflatable restraint steering wheel module one revolution clockwise while keeping the steering wheel from turning.

8.

Connect the horn switch connector from the steering wheel to the inflatable restraint steering wheel module.

Important:

When reinstalling the inflatable restraint steering wheel module, pull the airbag leads (yellow wires) in an upward direction, towards the top of
the steering wheel hub. This will prevent the wires from pressing down on the SIR coil connector. Then make sure the wires go back into
"pocket" area behind the SIR coil.

9.

Reinstall the inflatable restraint steering wheel module.

10.

Enable the SIR system (Zone 3).

11.

Start the vehicle and verify that the noise has been eliminated.

Warranty Information

Steering - Scraping Noise From Behind Steering Wheel|Page 7942 > < Steering - Scraping Noise From Behind Steering Wheel