Equinox FWD V6-3.4L VIN F (2005)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid/Switch Assembly Replacement
Removal Procedure
1. Remove the shift control assembly.
2. Disconnect the brake transaxle shift interlock (BTSI) solenoid harness connector.
3. Using a screwdriver, disconnect the plastic retainers at solenoid base and at the park lock lever.
4. Remove the solenoid from the shift control assembly.
Installation Procedure
1. Install the solenoid onto the shift control assembly. Connect the plastic retainers at the solenoid base and at the park lock lever.
2. Connect the BTSI solenoid harness connector.
3. Install the shift control assembly.
