Equinox FWD V6-3.4L VIN F (2005)
Power Window Switch: Service and Repair
Power Window Switch Replacement - Rear Door
Power Window Switch Replacement - Rear Door
Removal Procedure
1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Rear Door See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair
2. Use a flat-bladed tool to pry the switch from the door handle assembly.
3. Disconnect the electrical connector. Remove the switch.
Installation Procedure
1. Connect the electrical connector to the switch..