Express 1/2 Ton Van V6-4.3L VIN X (2003)
Front Door Striker: Service and Repair
Striker Replacement - Door (RPO PRP)
Striker Replacement - Door (w/ PRP)
Removal Procedure
1. Remove the bolts that retain the door lock striker to the door opening.
2. Remove the door lock striker from the door opening.
Installation Procedure
1. Install the door lock striker to the door opening.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts in order to retain the door lock striker to the door opening.
Tighten the retaining bolts to 10 N.m (89 lb in).
