Express 1/2 Ton Van V6-4.3L VIN X (2003)
7. Disconnect the cruise control cable from the cruise control module.
IMPORTANT: Do not allow the cruise control ribbon to retract into the module assembly.
8. Disconnect the cruise control cable bead from the buckle on the end of the ribbon.
9. Remove the cruise control cable from the vehicle.
INSTALLATION PROCEDURE
1. Route the cruise control cable (4) from the cruise control module (3) to the throttle body.
2. Remove all bends and twists from the cruise control module ribbon and cable, by rotating the ribbon.
IMPORTANT: Do not twist the cruise control module ribbon.
3. Pull the cruise control cable from the throttle linkage end until the cable is taut.
4. Install the cable bead to the buckle on the end of the ribbon on the cruise control module.
