Express 1/2 Ton Van V6-4.3L VIN X (2003)
Engine Mount: Service and Repair
Engine Mount Replacement - Left
Engine Mount Replacement - Left
Removal Procedure
Notice: Refer to Engine Mounting Notice in Service Precautions.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the engine mount to frame mounting bolts.
Notice: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or crankshaft balancer. Jacking
against the oil pan may cause it to crack or break.
Important: Raise the engine only enough to permit removal of the engine mount.
3. Use a jack on the square tab at the rear of the engine block, and raise the engine, left side shown.