Express 1/2 Ton Van V6-4.3L VIN X (2003)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the engine cover.
2. Remove the bolt holding the coolant recovery reservoir and set the reservoir aside.
3. Remove the oil level indicator.
4. Remove the screw holding the oil level indicator and the transmission fluid fill tube to the oil fill tube lower support.
5. Remove the top half of the oil level indicator tube from the bottom half.
6. Clean the old sealer from the tube.
7. Remove the oil level indicator tube bolt.
