Express 1/2 Ton Van V6-4.3L VIN X (2003)
21. Connect the following electrical connectors:
^
The fuel meter body assembly connector (1)
^
The EVAP canister purge solenoid valve (2)
^
The manifold absolute pressure (MAP) sensor (3)
22. Connect the following electrical connectors:
^
The throttle position (TP) sensor (1)
^
The idle air control (IAC) motor (2)
^
The engine coolant temperature (ECT) gage sensor (3)
^
The A/C high pressure switch (4), if equipped
23. Connect the PCV valve hose assembly to the intake manifold and the valve rocker arm cover.
24. Install the cruise control cable, if equipped to the throttle shaft and the accelerator control cable bracket.
25. Install the accelerator control cable to the throttle shaft and the accelerator control cable bracket.
