Express 1/2 Ton Van V6-4.3L VIN X (2003)
5. Remove the power steering cooler mounting bolts.
6. Remove the power steering cooler from the vehicle.
Installation Procedure
1. Install the power steering cooler to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering cooler mounting bolts.
Tighten the bolts to 5 Nm (44 inch lbs.).
3. Connect the power steering cooler hose to the power steering gear.
Tighten the hose fitting to 33 Nm (24 inch lbs.).
