Express 1/2 Ton Van V6-4.3L VIN X (2003)
1. Install the seat belt retractor to the vehicle.
2. Install the seat belt retractor retaining bolt to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the seat belt retractor retaining bolt to 52 N.m (38 lb ft).
3. Install the seat belt guide to the vehicle.
4. Install the seat belt guide retaining bolt to the vehicle.
Tighten
Tighten the seat belt guide retaining bolt to 52 N.m (38 lb ft).
5. Install the body side trim panel.
6. Install the upper seat belt trim cover (1).
7. Install the upper seat belt trim cover retainers (2).
Seat Belt Retractor Replacement - No. 4 Left Rear
