Express 1/2 Ton Van V6-4.3L VIN X (2003)
1. Install the battery negative cable to the vehicle.
2. Connect the battery negative cable lead to the engine block.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt that retains the battery negative cable lead to the engine block to 25 N.m (18 lb ft).
3. Lower the vehicle.
4. Connect the battery negative cable lead to the inner fender panel.
Tighten
Tighten the nut that retains the battery negative cable to the inner fender well to 10 N.m (89 lb in).
5. Connect the battery negative cable to the battery.
Tighten
Tighten the battery negative terminal bolt to 17 N.m (13 lb ft).
