Express 1/2 Ton Van V6-4.3L VIN X (2003)
11. Remove the oil fill tube.
12. Remove the bolts holding the heater outlet and inlet hoses to the oil fill tube lower support.
13. Remove the engine wiring harness retainer from the stud at the oil fill tube lower support.
14. Remove the stud and the bolt for the oil fill tube lower support.
15. Remove the oil fill tube lower support.
16. Remove the upper fan shroud section.
17. Remove the drive belt.
18. Remove the generator.
19. Remove the drive belt tensioner.
20. Remove the drive belt idler pulley.
21. Remove the 2 bolts and nut holding the generator mounting bracket to the engine.
22. Slide the generator mounting bracket off of the stud.
