Express 1/2 Ton Van V6-4.3L VIN X (2003)
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the upper control arm nuts and the adjustment cams.
-
Tighten the nuts to 175 Nm (129 ft. lbs.).
4. Connect the upper control arm to the steering knuckle.
5. Install the new upper ball joint retaining nut.
-
Tighten
-
Tighten the nut to 50 Nm (37 ft. lbs.).
6. Install the wheel drive shaft (4WD only).
7. Install the retaining bolts for the brake hose and wheel speed sensor brackets.
-
Tighten the brake hose bracket to steering knuckle bolt to 10 Nm (88 inch lbs.).
