Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
Headlamp Bulb: Service and Repair
REMOVAL PROCEDURE
1. Turn OFF the headlamp switch.
CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To
help avoid personal injury:
^
Turn oft the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch off until the bulb change is complete.
^
Always wear eye protection when changing a halogen bulb.
^
Handle the bulb only by its base. Avoid touching the glass.
^
Do not drop or scratch the bulb.
^
Keep dirt and moisture off the bulb.
^
Place the used bulb in the new bulb's carton and dispose of it properly.
^
Keep halogen bulbs out of the reach of children
2. Disconnect the electrical connector from the headlamp bulb.
3. Rotate the bulb counterclockwise in order to disengage the bulb from the headlamp.
4. Remove the bulb from the headlamp.
INSTALLATION PROCEDURE
1. Install the bulb to the headlamp.
2. Rotate the bulb clockwise in order to engage the bulb in the headlamp.
3. Connect the electrical connector to the headlamp bulb.
