Express 1/2 Ton Van V8-305 5.0L VIN M SFI (1998)
INSTALLATION PROCEDURE
1. Install the cable to the vehicle.
2. Connect the positive lead to the generator.
NOTICE: Refer to Fastener Notice in Cautions and Notices.
Tighten
Tighten the generator output (BAT) nut to 18 N.m (13 lb ft).
3. Install the positive lead to the starter solenoid.
Tighten
Tighten the positive lead to starter solenoid to 10 N.m (89 lb in).
4. Install the positive lead to the junction block.
Tighten
Tighten the junction block nut to 10 N.m (89 lb in).
