Express 1/2 Ton Van V8-5.7L VIN R (1999)
Alarm Module: Service and Repair
Theft Deterrent Module Bracket Replacement
REMOVAL PROCEDURE
1. Remove the Passlock TM control module.
2. Remove the rivets (3) that retain the Passlock TM control module bracket to the instrument panel carrier (2).
3. Remove the Passlock TM control module bracket (1) from the vehicle.
INSTALLATION PROCEDURE
1. Position the Passlock TM control module bracket (1) to the vehicle.
2. Install the rivets (3) that retain the Passlock TM control module bracket to the instrument panel carrier.
3. Install the Passlock TM control module.
