Express 1/2 Ton Van V8-5.7L VIN R (1999)
Keyless Entry Transmitter Battery: Service and Repair
Transmitter Battery Replacement (Export)
REMOVAL PROCEDURE
1. Insert a dime between the 2 halves of the transmitter near the key ring hole.
2. Twist the dime in order to open the transmitter.
3. Remove the battery from the transmitter.
INSTALLATION PROCEDURE
1. Install the battery into the transmitter cover positive side down. Use battery type CR2032 when you replace the battery.
2. Align the top and the bottom covers and snap them together.
3. Inspect the system operation.
