Express 1/2 Ton Van V8-5.7L VIN R (1999)
1. Lubricate the front brake caliper, bushings, bolts and seals with Delco Silicone Lube GM P/N 18010909 or the equivalent.
2. Install the front inboard brake pad.
^
Snap the retainer ring into the front brake caliper piston.
^
The front brake pad retainer spring is already staked to the brake pad.
^
The front brake pad must lay flat against the front brake caliper piston.
3. Install the front outboard brake pad with the wear indicator at the leading edge of the front brake pad during forward wheel rotation. The back of
the front brake pad must lay flat against the front brake caliper.
IMPORTANT: Before moving the vehicle, pump the brake pedal until it is firm. Check the fluid level in the brake master cylinder after pumping
the brakes.
4. Install the front brake caliper onto the front brake rotor.
