Express 1/2 Ton Van V8-5.7L VIN R (1999)
REMOVAL PROCEDURE
CAUTION: Refer to Brake Pipe Replacement Caution in Service Precautions.
IMPORTANT: Brake pipes that run parallel to each other must maintain a 6 mm (1/4 inch) clearance.
1. Disconnect the brake pipe(s) from the brake master cylinder.
2. Disconnect the rear brake pipe and/or the front brake pipe from the Electronic Brake Control Module (EBCM) unit.
3. Remove the brake pipe retaining clips from the frame.
4. Remove the brake pipe from the vehicle.
INSTALLATION PROCEDURE
