Express 1/2 Ton Van V8-5.7L VIN R (1999)
5. Install the parking brake release handle and the cable.
6. Connect the front parking brake cable to the rear parking brake cables.
7. Remove the pin from the parking brake lever.
8. Move the parking brake lever to the FULL up position.
9. Measure the threads on the equalizer. Adjust the threads to the following specifications:
^
Passenger/Cargo to 13 mm (0.511 inch)
^
Cutaway/Upfitters to 21 mm (0.826 inch)
10. Verify that the vehicle will hold position with the brake [ever depressed.
11. If additional adjustments need to be made, refer to Park Brake Cable Service/Adjustment.
