chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Alarm Module Replacement|Page 6871 > < Alarm Module Replacement|Page 6869
Page 8
background image

3. Disconnect the hose to the power steering fluid reservoir at the hydraulic power brake booster.

4. Disconnect the inlet hose and the outlet hose at the power brake booster.
5. Remove the power brake booster pushrod.
6. Remove the retaining nuts from the power brake booster.

7. Remove the power brake booster from the vehicle.
8. Remove the power brake booster gasket.

INSTALLATION PROCEDURE 

1. Install the power brake booster gasket.

Alarm Module Replacement|Page 6871 > < Alarm Module Replacement|Page 6869