Express 1/2 Ton Van V8-5.7L VIN R (1999)
Cruise Control Servo Cable: Service and Repair
REMOVAL PROCEDURE
1. Remove the engine cover from the vehicle.
2. Pull the cruise control cable (2) from the throttle fever pin (3).
3. Squeeze the retaining tabs on the cruise control cable in order to release the cable from the bracket.
4. Remove the cruise control cable (2) from the bracket (1) on the engine.
5. Remove the air cleaner assembly from the vehicle.
6. Remove the cruise control cable from the retaining clip on the fan shroud.
7. Remove the nuts that retain the cruise control module bracket to the cowl.
8. Remove the cruise control module and the bracket assembly away from the studs on the cowl.
9. Disconnect the cruise control cable (4) from the cruise control module (2).
10. Remove the cruise control cable bead (3) from the buckle at the end of the ribbon (1) on the cruise control module.
11. Remove the cruise control cable (4) from the vehicle.
INSTALLATION PROCEDURE
