Express 1/2 Ton Van V8-5.7L VIN R (1999)
Coolant Reservoir: Service and Repair
Coolant Recovery Reservoir Replacement
Removal Procedure
1. Partially drain the engine coolant.
2. Remove the coolant recovery reservoir hose clamp and the hose at the radiator overflow fitting.
3. Remove the coolant recovery reservoir retaining bolt.
4. Remove the coolant recovery reservoir from the cowl tabs.
5. Remove the coolant recovery reservoir from the vehicle.
6. Clean the coolant recovery reservoir with soap and water.
7. Rinse the coolant recovery reservoir with clean water.
Installation Procedure
Notice: Refer to Coolant Addition Notice in Service Precautions.
