Express 1/2 Ton Van V8-5.7L VIN R (1999)
6. Use the J 23523-F in order to install the crankshaft balancer.
Notice: Refer to Fastener Notice in Service Precautions.
Install the crankshaft pulley in the following manner:
7. Install the pulley and the three bolts.
8. Install the crankshaft balancer bolt.
9. Tighten
-
Tighten the pulley bolts to 58 Nm (43 ft. lbs.).
-
Tighten the crankshaft balancer bolt to 100 Nm (74 ft. lbs.).
10. Install the water pump.
11. Install the A/C condenser, if equipped.
12. Install the radiator.
13. Install the hood latch bracket.
14. Install the radiator grille.
15. Install the engine cooling fan and the upper fan shroud.
16. Install the valve lifters.
17. Install the lower intake manifold.
18. Install the valve rocker arms and push rods.
19. Connect the battery negative cable.
20. Replace the engine oil filter.
