Express 1/2 Ton Van V8-5.7L VIN R (1999)
Heat Shield: Service and Repair
Exhaust Heat Shield Replacement (Frame)
Removal Procedure
1. Raise the vehicle and suitably support the vehicle with safety stands.
2. Remove the exhaust system, as necessary.
3. Remove the bolts retaining the heat shield.
4. Remove the heat shield.
Installation Procedure
1. Install the heat shield.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the heat shield bolts.
^
Tighten the heat shield retainer bolt to 12 Nm (106 inch lbs.).
3. Install the exhaust system, as necessary.
4. Remove the safety stands.
5. Lower the vehicle.
