chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Control Assembly, HVAC > < Condenser HVAC|Specifications|Page 8227
Page 2
background image

1. Install the condenser (3) and the retaining bolts to the vehicle.

Tighten
Tighten the condenser retaining bolts to 10 N.m (89 lb in).

2. Install the A/C lines (4) to the condenser (1). 

Tighten
Tighten the compressor/condenser hose to the condenser to 28 N.m (21 lb ft).

3. Install the left hand headlamp housing.
4. Install the hood latch to the vehicle.
5. Install the lower hood latch cover to the vehicle.
6. Install the radiator grille.
7. Recharge the refrigerant. Refer to Refrigerant Recovery and Recharging.

Control Assembly, HVAC > < Condenser HVAC|Specifications|Page 8227