Express 1/2 Ton Van V8-5.7L VIN R (1999)
Control Assembly: Service and Repair
Control Assembly Bulb Replacement
REMOVAL PROCEDURE
1. Remove the heater and A/C control.
2. Pull the control head out tar enough to reach the lamp bulb socket.
3. Remove the lamp bulb and the socket with a 1/4 turn.
4. Gently lift the lamp bulb and the socket out from the control head.
INSTALLATION PROCEDURE
1. Install the new lamp bulb and the socket by inserting the bulb and socket into the control head.
2. Secure the bulb and the socket with a 1/4 turn.
3. Install the heater and the A/C control.
