Express 1/2 Ton Van V8-5.7L VIN R (1999)
Headlamp Switch: Service and Repair
Headlamp Leveling Switch Replacement
REMOVAL PROCEDURE
IMPORTANT: Do not use excessive force when prying the bezel from the instrument panel extension.
1. Pry the bezel (1) from the lower instrument panel extension.
2. Remove the electrical connector from the headlamp leveling actuator switch (2).
3. Press on the tabs on the headlamp leveling actuator switch (2) in order to disengage the tabs from the bezel (1).
4. Remove the headlamp leveling actuator switch (2) from the vehicle.
INSTALLATION PROCEDURE
1. Install the headlamp leveling actuator switch (2) into the opening in the front of the bezel (1).
2. Apply pressure to the headlamp leveling actuator switch to engage the tabs on the switch to the bezel (1).
