Express 1/2 Ton Van V8-5.7L VIN R (1999)
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the steering gear inlet hose (1) to the steering gear (2).
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
4. Install the power steering inlet hose (2) to the steering pump (1).
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
5. Check the power steering fluid level. Refer to Checking and Adding Power Steering Fluid.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system. Refer to Bleeding Power Steering System.