Express 1/2 Ton Van V8-5.7L VIN R (1999)
3. Install the hydraulic brake booster inlet hose (1) to the brake booster (2)
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
4. Install the hydraulic brake inlet hose (2) to the pump (1)
-
Tighten the hose fitting to 27 Nm (20 ft. lbs.).
5. Check the power steering fluid level.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system.
Power Brake Booster Outlet Hose Replacement
REMOVAL PROCEDURE
1. Install a drain pan under the vehicle.
2. Siphon the power steering fluid from the reservoir to prevent excessive spillage.
3. Remove the power steering outlet hose (1) from the hydraulic brake booster (2).
