chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Wheel Bearing Adjustment (10 1/2 Inch Ring Gear)|Page 1909 > < Wheel Bearing Adjustment (10 1/2 Inch Ring Gear)

Express 1/2 Ton Van V8-5.7L VIN R (1999)

Page 2
background image

Installation Procedure 

1. Install the key (5) into the keyway and the adjusting nut (4) slot.
2. Install the retaining ring (6).
3. Install the axle shaft (1). Refer to Axle Shaft Replacement (10 1/2 Inch Ring Gear).
4. Remove the supports and lower the vehicle.

Wheel Bearing Adjustment (10 1/2 Inch Ring Gear)|Page 1909 > < Wheel Bearing Adjustment (10 1/2 Inch Ring Gear)