Express 1/2 Ton Van V8-5.7L VIN R (1999)
1. With the throttle valve closed, install the TP sensor on the throttle shaft.
Rotate the TP sensor counterclockwise in order to align the mounting holes.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the TP sensor attaching fasteners.
Tighten
Tighten the fasteners to 2.0 N.m (18.0 lb in).
3. Install the TP sensor harness connector.
4. Install the engine cover.
5. Connect the negative battery cable.
