Express 1/2 Ton Van V8-5.7L VIN R (1999)
Fuel Line Coupler: Service and Repair
Metal Collar
REMOVAL PROCEDURE
TOOLS REQUIRED
J 37088-A Tool Set, Fuel Line Quick-Connect Separator
IMPORTANT: Relieve the fuel system pressure before servicing any fuel system connection. Refer to the Fuel Pressure Relief Procedure.
1. Slide the dust cover from the quick-connect fitting.
2. Grasp both sides of the fitting. Twist the female connector 1/4 turn in each direction to loosen any dirt within the fitting.
CAUTION: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
3. Blow dirt out of the fitting using compressed air.
