Express 1/2 Ton Van V8-5.7L VIN R (1999)
Fuel Gauge Sender: Service and Repair
Fuel Sender Buffer Module Replacement
REMOVAL PROCEDURE
1. Remove the instrument panel passenger knee bolster.
2. Remove the fuel sender buffer module (2) from the instrument panel passenger knee bolster inner bracket (4).
3. Disconnect the electrical connector (3) from the fuel sender buffer module.
4. Remove the fuel sender buffer module from the vehicle
INSTALLATION PROCEDURE
1. Position the fuel sender buffer module (2) to the vehicle.
2. Connect the electrical connector (3) to the fuel sender buffer module.
3. Install the fuel sender buffer module to the instrument panel passenger knee bolster inner bracket (4).
4. Install the instrument panel passenger knee bolster.