Express 1/2 Ton Van V8-5.7L VIN R (1999)
5. Remove the sliding side door control assembly (3) from the vehicle.
INSTALLATION PROCEDURE
1. Install the sliding side door control assembly (3) to the vehicle.
2. Install the sliding side door control assembly (3) to the sliding side door.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the bolts (4) in order to retain the sliding side door control assembly (3) to the sliding side door.
Tighten
Tighten the retaining bolts to 10 N.m (89 lb in).
