Express 1/2 Ton Van V8-5.7L VIN R (1999)
Seat Belt Retractor: Service and Repair
Seat Belt Retractor Replacement - #4
Left
Removal Procedure
1. Remove the seat belt escutcheon from the rear corner garnish molding.
2. Remove the rear corner garnish molding.
3. Remove the seat belt retractor retaining bolts from the seat belt retractor.
4. Remove the seat belt retractor from the vehicle.
Installation Procedure
1. Install the seat belt retractor to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the seat belt retractor retaining bolts to the vehicle.
Tighten
^
Tighten the seat belt retractor upper retaining bolt to
52 N.m (38 lb ft).
^
Tighten the seat belt retractor lower retaining bolt to
10 N.m (89 lb in).
3. Install the rear corner garnish molding.
4. Secure the seat belt escutcheon to the rear corner garnish molding.
Right
Removal Procedure
1. Remove the seat belt escutcheon from the rear corner garnish molding.
