chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Generator Replacement|Page 7055 > < Generator Assembly Bench Check|Page 7052
Page 1
background image

Alternator: Service and Repair
Generator Replacement

REMOVAL PROCEDURE

1. Disconnect the battery negative cable. 
2. Remove the coolant reservoir. 
3. Remove the air cleaner.
4. Remove the upper fan shroud. 
5. Remove the drive belt from the generator. 
6. Remove the heater hose pipe from the generator.
7. Remove the oil fill tubes from the support bracket.

8. Remove the support bracket from the generator bracket.

9. Remove the generator mounting bolts.

Generator Replacement|Page 7055 > < Generator Assembly Bench Check|Page 7052