chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

P/S Cooler Pipe/Hose Replacement|Page 7693 > < P/S Cooler Pipe/Hose Replacement|Page 7691
Page 2
background image

NOTICE:  Refer to Fastener Notice in Service Precautions.

3. Install the hydraulic brake booster inlet hose (1) to the brake booster (2)

-

Tighten the hose fitting to 27 Nm (20 ft. lbs.).

4. Install the hydraulic brake inlet hose (2) to the pump (1)

-

Tighten the hose fitting to 27 Nm (20 ft. lbs.).

5. Check the power steering fluid level.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system.

P/S Cooler Pipe/Hose Replacement|Page 7693 > < P/S Cooler Pipe/Hose Replacement|Page 7691