chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

P/S Cooler Pipe/Hose Replacement|Page 7695 > < P/S Cooler Pipe/Hose Replacement|Page 7693
Page 2
background image

NOTICE:  Refer to Fastener Notice in Service Precautions.

3. Install the power steering outlet hose (2) to the steering gear (1).

-

Tighten the hose fitting to 27 Nm (20 ft. lbs.).

4. Install the power steering outlet hose (1) to the hydraulic brake booster (2).

-

Tighten the hose fitting to 27 Nm (20 ft. lbs.).

5. Check the power steering fluid level.
6. Remove the drain pan from under the vehicle.
7. Bleed the power steering system.

P/S Cooler Pipe/Hose Replacement|Page 7695 > < P/S Cooler Pipe/Hose Replacement|Page 7693