Express 1/2 Ton Van V8-5.7L VIN R (1999)
8. Install the pitman shaft boot (2).
9. Install the pitman arm (3) to the steering gear.
10. Install the lock washer (2).
11. Install the nut (3).
Steering Gear Check Valve Replacement - Off Vehicle
DISASSEMBLY PROCEDURE
IMPORTANT: Do not to damage the threads of the steering gear housing when removing the check valve.
Remove the check valve (1) from the steering gear housing (2) using a small screwdriver.
ASSEMBLY PROCEDURE
Install the check valve (1) using a 3/8 inch diameter piece of tubing 100 mm (4 inches) long to drive into the steering gear housing (2).
Steering Gear Thrust Support Replacement - Off Vehicle
