Express 1/2 Ton Van V8-5.7L VIN R (1999)
Steering Wheel: Service and Repair
Steering Wheel and Column - Tilt
REMOVAL PROCEDURE
-
Tools Required
-
J 1859-A Steering Wheel Puller Set
CAUTION: Refer to SIR Service Precautions.
1. Remove the inflatable restraint steering wheel module. Refer to Infl Rst Steering Wheel Module Replacement in Air Bags and Seat Belts.
2. Mark the relationship of the steering wheel (1) to the column.
3. Remove the steering wheel and the nut (2).
4. Use the J 1859-A in order to remove the steering wheel from the column.
INSTALLATION PROCEDURE
1. With the marked relationship references in line, install the steering wheel (1) onto the column.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the steering wheel nut (2).
-
Tighten the steering wheel nut to 41 Nm (30 ft. lbs.).
3. Install the inflatable restraint steering wheel module. Refer to Infl Rst Steering Wheel Module Replacement in Air Bags and Seat Belts.
