Express 1/2 Ton Van V8-5.7L VIN R (1999)
NOTICE: Refer to Fastener Notice in Service Precautions.
-
Tighten the nuts to 24 Nm (18 ft. lbs.).
6. Install the tie rod end into the knuckle and install the tie rod end retaining nut. Refer to Tie Rod Replacement.
7. Install the hub/rotor. Refer to Wheel Hub, Bearing, and Seal Replacement.
8. Adjust the wheel bearings. Refer to Wheel Bearing Adjustment.
9. Install the front brake caliper.
10. Install the tire and wheel assembly.
11. Remove the safety stands.
12. Lower the vehicle.
13. Check the front wheel alignment. Refer to Wheel Alignment Specifications in Alignment.
