Express 1/2 Ton Van V8-5.7L VIN R (1999)
^
Tire damage caused by the modified clearance to the adjacent vehicle components
^
Adverse vehicle steering stability caused by the modified scrub radius
^
Damage to the vehicle caused by the modified ground clearance
^
Speedometer and odometer inaccuracy
Important:
^
Replacement wheels must be equivalent to the original equipment wheels in the following ways:
-
The load capacity
-
The wheel diameter
-
The rim width
-
The wheel offset
-
The mounting configuration
^
A wheel of the incorrect size or type may effect the following conditions:
-
Wheel and hub-bearing life
-
Brake cooling
-
Speedometer/odometer calibration
-
Vehicle ground clearance
-
Tire clearance to the body and the chassis
Replace the wheel if the wheel is bent.
4. Replace the wheel if the wheel/nut boss area is cracked. Identify steel wheels with a 2 or 3 letter code stamped into the rim near the valve stem.
Aluminum wheels have the code, the part number, and the manufacturer identification cast into the back side of the wheel.